Millimeter per Second to Velocity of Sound in Pure Water

Millimeter per second measures distance in millimeters traveled in one second. Used for small-scale movements and precise measurements.

1 mm/s = 0.001 m/s = 0.0036 km/h = 0.06 m/min.

To m/s: ÷ 1,000. To cm/s: ÷ 10. To km/h: × 0.0036.

Vibration measurements (machinery typically 0.1–50 mm/s RMS), small motor speeds, precision linear actuators, and tape/film transport speeds.

Machinery vibration: >10 mm/s indicates problems. Seismic activity: 0.001–100 mm/s. CD/DVD read head: 1.2–1.4 mm/s linear velocity.

Confusing mm/s with cm/s (10× different) or m/s (1000× different).

1,000 mm/s = 1 m/s. Very common in vibration analysis. 10 mm/s RMS is a typical machinery vibration threshold.

The speed of sound in pure water at 20°C is approximately 1,482.7 m/s, significantly faster than in air due to water's higher density and bulk modulus.

Depends on water temperature, salinity, and pressure. At 20°C, pure water: ~1,483 m/s. Varies with depth and location.

To km/h: × 3.6. To ft/s: × 3.281. 1,483 m/s = 5,339 km/h = 3,317 mph.

Sonar (submarine detection, fish finding), ultrasound imaging, underwater communication, and oceanographic measurements.

Sound in water travels ~4.3× faster than in air. Whales can communicate over hundreds of km using this. SOFAR channel enables even longer distances.

Assuming sound speed in water equals sound in air — it's much faster. Also, forgetting temperature dependence.

~1,500 m/s in water (rule of thumb). 4–5× faster than in air. Increases with temperature, salinity, and depth.