Instant · Precise · Universal
47 units available
6 categories total
To liters: multiply by 10. To gallons (US): multiply by 2.64172. To cubic meters: multiply by 0.01.
1 daL = 10 L = 10,000 mL = 0.01 m³. There are 100 daL in one cubic meter.
For example, 1 Dekaliter (daL) = 10000 Milliliter (mL).
| Dekaliter (daL) | Milliliter (mL) |
|---|---|
| 0.1 | 1000 |
| 0.5 | 5000 |
| 1 | 10000 |
| 2 | 20000 |
| 5 | 50000 |
| 10 | 100000 |
| 25 | 250000 |
| 50 | 500000 |
| 100 | 1000000 |
| 500 | 5000000 |
| 1000 | 10000000 |
The dekaliter is a unit of volume equal to 10 liters, sometimes used in agriculture and wholesale trade.
1 daL = 10 L = 10,000 mL = 0.01 m³. There are 100 daL in one cubic meter.
To liters: multiply by 10. To gallons (US): multiply by 2.64172. To cubic meters: multiply by 0.01.
Grain measurement in agriculture, some wholesale liquid commodities, and European wine production quantities.
The dekaliter is one of the least commonly used SI-prefixed volume units, overshadowed by liters for small volumes and hectoliters for large ones.
Confusing 'da' (deka, 10) with 'd' (deci, 0.1). A dekaliter is 10 L, while a deciliter is 0.1 L — a 100× difference.
Think of a dekaliter as a large bucket or carboy holding 10 liters. The prefix 'deka' just means ten.
The milliliter is a unit of volume equal to one thousandth of a liter (10⁻³ L), exactly equal to one cubic centimeter.
1 mL = 10⁻³ L = 1 cm³ = 1 cc = 1,000 µL. There are 1,000 mL in one liter.
To liters: divide by 1,000. To fluid ounces (US): multiply by 0.033814. To teaspoons (US): multiply by 0.202884.
Medicine dosing, cooking measurements, beverage volumes (e.g., 330 mL soda can), and cosmetic product sizing.
A standard soda can holds 330–355 mL. A shot glass holds about 44 mL. One mL of water weighs exactly 1 gram at 4 °C.
Confusing mL with mg (volume vs. mass). Also, 1 mL of oil or alcohol does NOT weigh 1 gram — only water does (at 4 °C).
1 teaspoon ≈ 5 mL, 1 tablespoon ≈ 15 mL. These are the best kitchen anchors. A standard medicine syringe holds 5 mL.



© 2026 UntangleTools. All Rights Reserved.