Instant · Precise · Universal
47 units available
6 categories total
To mL: multiply by 28.4131. To US fl oz: multiply by 0.96076. To UK pints: divide by 20.
1 UK fl oz = 1/20 UK pt = 1/160 UK gal ≈ 28.4131 mL. It is about 4% smaller than a US fluid ounce.
For example, 1 Fluid Ounce (UK) (fl oz (UK)) = 0.00284130625 Dekaliter (daL).
| Fluid Ounce (UK) (fl oz (UK)) | Dekaliter (daL) |
|---|---|
| 0.1 | 0.000284130625 |
| 0.5 | 0.001420653125 |
| 1 | 0.00284130625 |
| 2 | 0.0056826125 |
| 5 | 0.01420653125 |
| 10 | 0.0284130625 |
| 25 | 0.07103265625 |
| 50 | 0.1420653125 |
| 100 | 0.284130625 |
| 500 | 1.420653125 |
| 1000 | 2.84130625 |
The UK fluid ounce is a unit of liquid volume equal to 1/160 of an imperial gallon, or approximately 28.413 milliliters.
1 UK fl oz = 1/20 UK pt = 1/160 UK gal ≈ 28.4131 mL. It is about 4% smaller than a US fluid ounce.
To mL: multiply by 28.4131. To US fl oz: multiply by 0.96076. To UK pints: divide by 20.
Older UK recipes, some beverage labels in Commonwealth countries, and traditional pharmaceutical dosing.
Paradoxically, the UK fluid ounce is smaller than the US fluid ounce (28.41 vs. 29.57 mL), even though UK pints and gallons are larger.
Assuming UK and US fluid ounces are the same — they differ by about 4%. This seems small but accumulates in recipes.
UK fl oz ≈ 28.4 mL, US fl oz ≈ 29.6 mL. The UK has more fl oz per pint (20) vs. US (16), but each UK fl oz is smaller.
The dekaliter is a unit of volume equal to 10 liters, sometimes used in agriculture and wholesale trade.
1 daL = 10 L = 10,000 mL = 0.01 m³. There are 100 daL in one cubic meter.
To liters: multiply by 10. To gallons (US): multiply by 2.64172. To cubic meters: multiply by 0.01.
Grain measurement in agriculture, some wholesale liquid commodities, and European wine production quantities.
The dekaliter is one of the least commonly used SI-prefixed volume units, overshadowed by liters for small volumes and hectoliters for large ones.
Confusing 'da' (deka, 10) with 'd' (deci, 0.1). A dekaliter is 10 L, while a deciliter is 0.1 L — a 100× difference.
Think of a dekaliter as a large bucket or carboy holding 10 liters. The prefix 'deka' just means ten.



© 2026 UntangleTools. All Rights Reserved.