Mile per Hour to Foot per Minute

Mile per hour measures how many statute miles are traveled in one hour. It's the primary speed unit in the United States and some other countries using imperial measurements.

1 mph = 0.44704 m/s = 1.609 km/h. The conversion factor comes from the statute mile definition.

To km/h: × 1.609. To m/s: × 0.447. To ft/s: × 1.467. To knots: × 0.869.

US speed limits (25 mph residential, 65–75 mph interstate), vehicle speeds in US/UK, hurricane wind speeds (74+ mph), and baseball pitch speeds.

Sound barrier: 767 mph at sea level. Fastest car: 282.9 mph (Koenigsegg). Commercial jet: 550–580 mph cruise. Cheetah: 70 mph sprint.

Assuming 1 mph ≈ 1 km/h — actually 1 mph ≈ 1.6 km/h. Also, confusing statute miles with nautical miles.

Quick conversion: multiply mph by 1.6 for approximate km/h. Remember: 60 mph ≈ 100 km/h (slightly off but close).

Foot per minute measures distance in feet traveled in one minute. Common in US industrial and HVAC applications.

1 ft/min = 0.00508 m/s = 0.01829 km/h = 0.3048 m/min.

To ft/s: ÷ 60. To m/s: × 0.00508. To mph: ÷ 88.

HVAC duct air velocity (600–2,000 fpm), conveyor belts (50–300 fpm), elevator speeds (200–1,500 fpm), and escalators (90–120 fpm).

Typical HVAC duct: 800–1,200 fpm. High-rise elevator: 1,000 fpm. Airport moving walkway: 140 fpm.

Confusing ft/min with ft/s — ft/min is 60× slower. Mixing fpm with mph.

60 ft/min = 1 ft/s. ~88 ft/min = 1 mph. Essential for HVAC calculations in the US.